昨天歷經1.5小時的口試程序，終於完成論文口試，由於有點小緊張，
加上事前準備工作不足，造就口試當天呈現忙碌的狀態，一直跑來跑
去多少影響口試心情，好在在口試前二十分鐘搞定一切。
由於口試委員晚一點，所以多一點時間調適心情，由於口試委員的點
心、咖啡、水果都是由我自己擺設，所以忙碌之下，忘了將桌上的擺
設拍照下來，真是有點後悔。準備給口試委員的飲料為星巴克的Venti
冰那堤，點心為Dora-Yaki的黃金派及沖繩黑糖麻糬，水果則是女友利
用假日去市場買回來分裝入盒的。
口試完之後總算是鬆了一口氣，但是要補充的東西還不算少，利用一
星期將論文進行補完計畫，儘快送印、完成離校手續，拿到畢業證書
才能安心囉，繼續加油~
星期三, 7月 09, 2008
星期日, 5月 13, 2007
星期六, 12月 09, 2006
星期一, 11月 27, 2006
Ethereal Filter
今天用Ethereal(wireshake)撈出了一堆封包，
不過卻不知道怎麼去Filter IP，
後來摸索了一下，
發現可以這麼下…
只要看單一IP：
ip.addr eq xxx.xxx.xxx.xxx
要看二個IP：
ip.addr eq xxx.xxx.xxx.xxx and ip.addr eq xxx.xxx.xxx.xxx
要下多個條件：
(ip.addr eq xxx.xxx.xxx.xxx and ip.addr eq xxx.xxx.xxx.xxx) and (tcp.port eq 12345 and tcp.port eq 4444)
不過卻不知道怎麼去Filter IP，
後來摸索了一下，
發現可以這麼下…
只要看單一IP：
ip.addr eq xxx.xxx.xxx.xxx
要看二個IP：
ip.addr eq xxx.xxx.xxx.xxx and ip.addr eq xxx.xxx.xxx.xxx
要下多個條件：
(ip.addr eq xxx.xxx.xxx.xxx and ip.addr eq xxx.xxx.xxx.xxx) and (tcp.port eq 12345 and tcp.port eq 4444)
星期一, 10月 16, 2006
Ushare安裝
Ushare web：http://ushare.geexbox.org/
OS：Mandriva 2005
Ushare version：0.97
Libupnp version：1.3.0
Pkgconfig version：0.18
Install Step：
一、download libupnp、pkgconfig、ushare and use tarball mode to install
二、if you don’t install libupnp, it will show the message…
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for libupnp... Package libupnp was not found in the pkg-config search path.
Perhaps you should add the directory containing `libupnp.pc'
to the PKG_CONFIG_PATH environment variable
No package 'libupnp' found
configure: error: Package requirements (libupnp >= 1.3.1) were not met.
Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.
Alternatively you may set the libupnp_CFLAGS and libupnp_LIBS environment variables
to avoid the need to call pkg-config. See the pkg-config man page for
more details.
三、If you don’t install pkgconfig, it will show not find ‘libupnp.pc’
四、change dir to /usr/lib/pkgconfig/，and link /usr/local/lib/pkgconfig/libupnp.pc to /usr/lib/pkgconfig/
Do：ln -s /usr/local/lib/pkgconfig/libupnp.pc libupnp.pc
When ushare configure will pass
五、If show error message：ushare: error while loading shared libraries: libupnp.so.2: cannot open shared object file: No such file or directory
That is libupnp's library connect error，link /usr/local/lib(3 files) to /lib
PS：change dir to /lib，do following three command
1. ln -s /usr/local/lib/libixml.so.2.0.0 libixml.so.2
2. ln -s /usr/local/lib/libthreadutil.so.2.0.0 libthreadutil.so.2
3. ln -s /usr/local/lib/libupnp.so.2.0.1 libupnp.so.2
六、copy /usr/etc/ushare.conf to /etc
七、then startup ushare ... that's ok
OS：Mandriva 2005
Ushare version：0.97
Libupnp version：1.3.0
Pkgconfig version：0.18
Install Step：
一、download libupnp、pkgconfig、ushare and use tarball mode to install
二、if you don’t install libupnp, it will show the message…
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for libupnp... Package libupnp was not found in the pkg-config search path.
Perhaps you should add the directory containing `libupnp.pc'
to the PKG_CONFIG_PATH environment variable
No package 'libupnp' found
configure: error: Package requirements (libupnp >= 1.3.1) were not met.
Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.
Alternatively you may set the libupnp_CFLAGS and libupnp_LIBS environment variables
to avoid the need to call pkg-config. See the pkg-config man page for
more details.
三、If you don’t install pkgconfig, it will show not find ‘libupnp.pc’
四、change dir to /usr/lib/pkgconfig/，and link /usr/local/lib/pkgconfig/libupnp.pc to /usr/lib/pkgconfig/
Do：ln -s /usr/local/lib/pkgconfig/libupnp.pc libupnp.pc
When ushare configure will pass
五、If show error message：ushare: error while loading shared libraries: libupnp.so.2: cannot open shared object file: No such file or directory
That is libupnp's library connect error，link /usr/local/lib(3 files) to /lib
PS：change dir to /lib，do following three command
1. ln -s /usr/local/lib/libixml.so.2.0.0 libixml.so.2
2. ln -s /usr/local/lib/libthreadutil.so.2.0.0 libthreadutil.so.2
3. ln -s /usr/local/lib/libupnp.so.2.0.1 libupnp.so.2
六、copy /usr/etc/ushare.conf to /etc
七、then startup ushare ... that's ok
訂閱：
文章 (Atom)